Fostex LIVE RECORDING MIXER LR16 - Manual (Page 10)

Model LR16 [Introduction/Overview]
10
• For normal cleaning, use a soft dry cloth.
For stubborn dirt, moisten a cloth in
diluted detergent, wring it out firmly, and
wipe the dirt off. Then polish with a dry
cloth. Never use solvents such as alcohol,
thinner or benzene, since these will
damage the printing and finish of the
exterior.
• When temperature and humidity change
suddenly (for example, when you move the
LR16 from a cold place to a warm place),
moisture condensation may occur to the
drive, display and panel. In such a case,
leave it with the power turned off for some
time until the moisture evaporates.
• The software of the LR16 will be upgraded
in the future. You can download the latest
software from our website and upgrade the
LR16 yourself. For details about how to
upgrade the LR16 to the latest software
version, see page 80.
• You can format the internal hard disk drive
via the MENU mode. For details, see
“Formatting the internal hard disk drive”
on page 78.
Cleaning the exterior
Condensation
About version upgrade
About copyrights
• Fostex is not responsible for any “direct
damage” or “indirect damage” caused by
using the LR16.
About damage
• It is prohibited by law to use any part of a
CD recording or video images or audio data
for which copyright is possessed by a third
party for commercial purposes such as
contents, broadcasts, sales, or distribution-
any purpose other than for your personal
pleasure.
• Use only a CAT-5 STP cable for connection
between the main unit and the control
unit.
About CAT-5 cable
<Note>: Do not connect or disconnect a
CAT-5 cable while the LR16 is powered on.
When you connect or disconnect a CAT-5
cable, make sure that the LR16 is powered
off.