Battery installation – Fisher-Price LIGHTING MCQUEEN H8256 User Manual

Page 12

Advertising
background image

IMPORTANT! Use only a Power Wheels

®

12 volt lead-acid

rechargeable battery. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least 18
hours using the enclosed Power Wheels

®

12 volt charger before

operating your vehicle for the first time. Charge the battery for at
least 14 hours after each use of the vehicle. Never charge the
battery longer than 30 hours. Failure to follow these instructions
may damage your battery and will void your warranty.

H8256pr-0920

12

BATTERY INSTALLATION

H

• Lift and pull the battery clamp forward.
• Plug the motor harness connector into the battery.

Battery Clamp

Power Wheels

®

12 Volt Battery

• Insert the end of the assembly tool or a coin into the slot on the side

of the hood.

• Use the tool to lift the hood and access the battery compartment.

Assembly Tool

1

2

• Place the battery in the battery compartment and release the

battery clamp. Make sure the battery clamp slides over the top of
the battery.

• Close the hood and fit the tabs on the hood into the slots in the

vehicle body.

• Press down to "snap" the hood in place.

3

Motor Harness Connector

Advertising