Furuno GP-1850W - Manual (Page 4)

ii
TABLE OF CONTENTS
FOREWORD .................................. iv
SYSTEM CONFIGURATION ......... v
WHAT IS WAAS?........................... vi
1. OPERATIONAL OVERVIEW
1.1 Display Unit Controls .....................1-1
1.2 Remote
Controller..........................1-2
1.3 Inserting Mini Chart Card ...............1-3
1.4 Turning the Power On/Off ..............1-3
1.5 Adjusting Tone and Brilliance .........1-4
1.6 Plotter
Displays..............................1-5
1.7 Steering/Highway Displays ............1-5
1.8 Menu Operation, Soft Keys ............1-6
1.9 Demonstration
Display...................1-7
2. PLOTTER DISPLAYS
2.1 Presentation Modes .......................2-1
2.2 Cursor............................................2-2
2.3 Shifting the Display ........................2-2
2.4 Displaying Nav Information Window2-2
2.5 Selecting Chart Scale/Range .........2-3
2.6 Mini Chart Cards............................2-3
2.7 Navigation Data Display.................2-6
2.8 Steering
Display.............................2-7
2.9 Highway Display ............................2-8
2.10 Changing Operation Mode .............2-9
2.11 Navigation Trip Distance ..............2-10
3. TRACK
3.1 Displaying Track ............................3-1
3.2 Stopping/Restarting Plotting
of Track..........................................3-1
3.3 Changing Track Color ....................3-2
3.4 Track Plotting Method, Interval.......3-2
3.5 Changing Track Memory
Capacity.........................................3-3
3.6 Erasing Tracks ...............................3-4
4. MARK
4.1 Entering Marks...............................4-1
4.2 Changing Mark Attributes...............4-2
4.3 Changing Mark Size.......................4-3
4.4 Erasing Marks ............................... 4-3
4.5 Displaying Track and Mark
Points ............................................ 4-4
4.6 Target Mark ................................... 4-4
5. WAYPOINTS
5.1 Entering Waypoints ....................... 5-1
5.2 Erasing Individual Waypoints......... 5-4
5.3 Changing Waypoint Data............... 5-5
5.4 Changing Waypoint Position on
the Plotter Display ......................... 5-5
5.5 Waypoint Mark Size....................... 5-6
5.6 Searching
Waypoints..................... 5-6
6. ROUTES
6.1 Entering Routes............................. 6-1
6.2 Connecting Routes........................ 6-2
6.3 Inserting, Removing Waypoints ..... 6-3
6.4 Creating Track-based Routes........ 6-5
6.5 Erasing Routes.............................. 6-6
7. NAVIGATION
7.1 Navigating to “Quick Points” .......... 7-1
7.2 Navigating to Waypoints
(waypoint list) ................................ 7-2
7.3 Navigating to Ports, Port
Services ........................................ 7-2
7.4 Following a Route.......................... 7-4
7.5 Canceling
Navigation .................... 7-6
8. PLOTTER ALARMS
8.1 Introduction ................................... 8-1
8.2 Audio
Alarm On/Off ....................... 8-1
8.3 Arrival Alarm.................................. 8-2
8.4 Anchor Watch Alarm...................... 8-2
8.5 XTE (Cross Track Error) Alarm...... 8-3
8.6 Speed
Alarm ................................. 8-3
8.7 Proximity Alarm ............................. 8-3
8.8 Alarm Information .......................... 8-4
9. MEMORY CARD OPERATIONS
9.1 Formatting Memory Cards............. 9-1
9.2 Saving Data to Memory Card ........ 9-2
9.3 Loading Data from Memory Card .. 9-3