Mpeg, Two-channel (pcm), Dolby surround encoding – Meridian Audio 565 User Manual

Page 14: Dolby digital thx, Dts music, Dts thx, Mpeg music, Pro logic, Dts music dsp preset, Dts thx dsp preset

Advertising
background image

10

Introduction

MPEG Surround

MPEG Surround is the preferred audio format for DVD in PAL

territories, and along with Dolby Digital is a contender as the

standard for music and performance videos on DVD worldwide.

In addition, it is widely available in US satellite broadcasts.

THX versions

THX versions of Dolby Digital, MPEG Surround, and DTS are

provided to give a better match between the original soundtrack

and typical domestic listening conditions.

Music versions

Music versions of Dolby Digital, MPEG Surround, and DTS are

provided with a lower LFE level, to match the bass levels in

music CDs.

MLP (MLP version only)

MLP (Meridian Lossless Packing) is the standard format for

music on DVD. It allows multiple audio channels, of up to

192kHz 24-bit quality, to be stored on a DVD without losing any

information. It can also be used to store four-channel audio on a

standard CD without any loss of quality.

Multi-channel sources encoded onto
two channels

Several systems have been developed for encoding multi-

channel sources onto a standard two-channel analogue signal

so that they can be reproduced by a conventional stereo

system, or decoded with special equipment for multi-channel

reproduction. The 565 Digital Surround Processor provides

decoding of the two most important of these, Ambisonic and

Dolby Surround. Although the channel separation cannot be as

good as with the digital multi-channel formats, the 565 produces

excellent results with these formats.

Pro Logic

The Pro Logic preset is recommended for decoding Dolby

Surround encoded video and LaserDisc soundtracks, and films

on television. Such materials are usually identified by a Dolby

Surround symbol on the packaging, or displayed on the film

before the programme.

Advertising