Standard parameters, Balance (dsp parameter), Bass (dsp parameter) – Meridian Audio 565 User Manual
Page 28: Centre (dsp parameter), Depth (dsp parameter), Bass, Centre, Lipsync, Phase, R delay
Customising the digital surround processor
24
Parameter
Range
Default
What it changes
Treble * †
-10dB to +10dB
+0dB
The slope of the frequency response.
Bass * †
-5dB to +5dB
+0dB
The bass response.
Phase *
+ or -
+
The phase of all loudspeakers.
Balance
<10 to 10>
<0>
The L-R balance.
Centre
-3dB to +3dB
+0dB
The level of the centre.
Depth
-2.5ms to +5ms
+0.0
The relative delay of the centre.
Rear
-30dB to +10dB
+0dB
The relative level of the rears.
Sides
-30dB to +10dB
+0dB
The relative level of the sides.
R Delay
15ms to 30ms
0.0
The relative delay of the rears.
S Delay
15ms to 30ms
0.0
The relative delay of the sides.
LipSync
0ms to 30ms
0.0
The sync. delay.
OSD *
Off, Low, Med, High
Low
The position of the on-screen display.
* These parameters apply to all DSP presets.
† Note that these parameters appear on the speakers if you are using DSP loudspeakers.
Standard parameters