Meridian Audio 565 - Manual (Page 23)

Using the digital surround processor
19
The digital surround processor displays information about the
current settings on the twelve-character front panel display. In
addition, it can display the same information superimposed on a
video image. For more information about setting up the on-
screen display refer to the Meridian 565 Digital Surround
Processor Installation Guide.
To change the display
● Press Display.
Each time you press Display the display will step between the
options shown in the table opposite.
In addition, the following symbols on the front panel display
indicate which of the DSP processing modes are operating:
Symbol What it means
Dolby processing is operating.
THX processing is operating.
Changing the display
Display option Example
DSP preset and volume
Music 65
DSP preset and THX gain
Music -22
Source and volume
Radio 65
Audio stream
3/2.1 -27 65
Blank
The audio stream display option shows the following three
pieces of information about the audio stream:
3/2.1 -27 65
Volume level Input channels:
Front/Rear.LFE Dialogue normalisation
level (for Dolby Digital)