Meridian Audio 565 - Manual (Page 35)

Customising the digital surround processor
31
The 565 Digital Surround Processor allows you to design up to
16 DSP presets of your own and save them permanently, with
names of your choice, so you can use them alongside the
built-in DSP presets.
To save the preset settings
● Make sure the menus are unlocked; see To unlock the menus,
page 22.
● Press > or < until the DSP preset associated with the current
source is displayed.
● Press A or V to select the preset you want to modify.
● Change the preset parameters to the values you want to
store; see To change a DSP parameter, page 23.
● Press Store twice.
The display shows the next available user-defined preset.
For example:
User 5
● If you want to overwrite an existing user-defined preset press
A or V to select the preset you want to overwrite.
For example:
Football
● Press Store.
The settings are stored in the new or existing preset you
selected.
You can now edit the name of the preset if you wish.
A flashing cursor shows the letter you
are editing:
º •ser 5
Defining your own presets