Washer features, Cycle options, Cycle settings con’t – FRIGIDAIRE 134489700A (0501) User Manual

Page 3

Advertising
background image

PN 134489700A (0501)

Washer Features

Delay Start
Press Delay Start to select a wash time convenient to your
schedule or during off peak energy hours. The start of the
cycle can be delayed for up to 12 hours.

Status Lights
The following will be displayed at the appropriate times
during the cycle:

Door Lock

Wash

Rinse

Final Spin

• Control

Control
To avoid having someone accidentally start or stop the
washer, press OPTIONS and SELECT at the same time
until the Control indicator is lighted. To unlock the
controls, press OPTIONS and SELECT again.

Estimated Time
The estimated total cycle time will be displayed when
the cycle is selected. The time may increase if water
pressure is low or the load becomes unbalanced. The
approximate time remaining will be displayed during
the cycle.

Soil Level
Select HEAVY SOIL to increase the wash time or LIGHT
SOIL to decrease the wash time in some cycles.

Cycle Heavy Soil

Heavy + 2 minutes

Normal

+ 2 minutes

Perm Press

+ 2 minutes

Water Level
There is no need to select a water level. The washer auto-
matically adjusts the water level to the type and size of
wash load.

Final Spin Speed
The High, Medium and Low spin speeds have been
developed for each cycle. The speeds will vary from
cycle to cycle. For example, High Speed in the Normal
cycle is much faster than High Speed in the Handwash
cycle.

Increasing spin speed will extract more water and
decrease drying time.

Decreasing spin speed will reduce wrinkling.

HANG DRY is available with some cycles to gently spin

items that should not be machine dried.

Use NO SPIN to omit the final spin at the end of the
cycle. The load will be very wet. Remove items from
the wash drum to drip dry or select DRAIN / SPIN to
remove excess water at a more convenient time.

Cycle Options

To select or delete the Press Saver, Extra Rinse, Extra
Spin or Cycle Signal, press OPTIONS until the blinking
light indicates the desired option.

Then,

while it is

blinking, press SELECT. The indicator will light when
the option has been selected. It will no longer be
lighted when the option has been deleted. To provide
the best care for your laundry items, not every option is
available with every cycle.

Press Saver
Adding the Press Saver option alters the spin pattern of
the cycle to further reduce wrinkling.

Extra Rinse
Use this option when additional rinsing is desired to re-
move excess dirt and detergent. It is recommended for
heavily soiled loads or if household members have sensi-
tive skin. Extra Rinse occurs before the final rinse when the
liquid fabric softner is dispensed.

Extra Spin
Use this option to add several additional minutes to the
final spin at the selected speed. This will improve water
extraction and decrease drying time.

Cycle Signal
A signal will sound at the end of the cycle when the cycle
signal is selected.

Cycle Settings Con’t

Advertising