Meridian Audio 558 - Manual (Page 11)

Setting up the multi channel power amplifier
6
Unpacking
The 558 Multi Channel Power Amplifier comes in a box
containing the following components:
❍ 558 Multi Channel Power Amplifier.
❍ 1 power cord.
❍ 2 bridged mode links.
❍ This manual.
You are advised to retain the packing in case you need to
transport the unit.
The 558 Multi Channel Power Amplifier weighs 50kg. Do not
attempt to lift it without assistance.
Before connecting power
Before you begin installation you should ensure that your multi
channel power amplifier is set to the correct voltage for your
local AC supply. If it is not, do not try to install the unit, and
contact your dealer.
Do not make connections, or insert or remove plugs, while
the unit is connected to the supply and switched on, as the
transients generated could damage the loudspeakers.
To position the multi channel power
amplifier
During normal operation the internal heatsinks may become
quite hot. The multi channel power amplifier should therefore be
positioned to allow a free flow of air through the cooling vents
from the base to the top.
Do not place the multi channel power amplifier:
❍ In direct sunlight.
❍ Near heat sources, eg a radiator.
❍ Stacked with any other audio products, as the heat it
generates may damage the other products.
Do not restrict airflow through the top and bottom vents.