Controls and features – FORD 2000 Escort User Manual

Page 38

Advertising
background image

Fan speed control

Controls the volume of air circulated
in the vehicle.

Temperature control knob

Controls the temperature of the
airflow inside the vehicle.

Mode selector control

Controls the direction of the airflow
to the inside of the vehicle.

The air conditioning compressor will operate in all modes except
and

. However, the air conditioning will only function if the outside

temperature is about 10°C (50°F) or higher.

Since the air conditioner removes considerable moisture from the air
during operation, it is normal if clear water drips on the ground under
the air conditioner drain while the system is working and even after you
have stopped the vehicle.
• MAX A/C-Uses recirculated air to cool the vehicle. MAX A/C is noisier

than A/C but more economical and will cool the inside of the vehicle
faster. Airflow will be from the instrument panel registers. This mode
can also be used to prevent undesirable odors from entering the
vehicle. When placed in MAX A/C, the air conditioning will operate at
a full cool temperature. Therefore, the temperature control becomes
non-functional.

• A/C-Uses outside air to cool the vehicle. It is quieter than MAX A/C

but not as economical. Airflow will be from the instrument panel
registers.

(Panel)-Distributes outside air through the instrument panel

registers. However, the air will not be cooled below the outside
temperature because the air conditioning does not operate in this
mode.

HI

LO

OFF

A/C

MAX

A/C

Controls and features

38

Advertising