Fluke Ti45 - Manual (Page 72)

Ti40, Ti45 Ti50, Ti55
Users Manual
6-8
Naming Image Files
When you save an image, its name is added to the upper left corner of the
image display.
An image name looks like this: IR00020060515_0001
• IR is prefix (The prefix assigned to the image is based on the prefix last
assigned and stored in the camera settings.)
• 20060515 is the eight-digit date
• 0001 is the four-digit sequencing number
Changing Image File Name Prefix
To change the prefix used in the saved image name:
Note
This change affects only new images saved to the memory card and
does change the prefix of previously saved images.
1. Tap F.
2. Use the MOUSE controller to position the pointer over Camera Settings
on the popup menu.
3. Tap E.
4. Position the pointer over the Files tab and tap E.
5. Position the pointer over Edit and tap E to open the Prefix Editor.
6. Select and click on up to five alphanumeric characters one at a time. Tap
the TRIGGER button to accept setting change and return to Camera
Settings window.
7. Tap the TRIGGER button again to return to scan target mode.