FRIGIDAIRE 819042059-01 - Manual (Page 7)

Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Sleep Sleep Check
Filter Check
Filter
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Sleep Sleep Check
Filter Check
Filter
Temp/Timer Temp/Timer
Fan Fan
Temp/Timer Temp/Timer
Timer Timer On/Off On/Off
Temp/Timer Temp/Timer
Fan Fan
Temp/Timer Temp/Timer
Timer Timer On/Off On/Off
Air Conditioner features
(continued)
TO USE AUTO COOL FEATURE: YOU WILL SEE:
DO THIS:
PRESS TO
SELECT
AUTO COOL
TO OPERATE ON FAN ONLY: YOU WILL SEE:
DO THIS:
PRESS
MODE
BUTTON
CHOOSE
FAN
NOTE: Use this function only when cooling is not desired,
such as for room air circulation or to exhaust stale air. You
can choose any fan speed you prefer. During this function,
the display will show the actual room temperature, not the
set temperature as in the cooling mode.
TO USE THE ENERGY SAVER
FEATURE: YOU WILL SEE:
DO THIS:
PRESS
MODE
BUTTON
CHOOSE
ENERGY
SAVER
NOTE: In this mode, the fan will continue to run for 3
minutes after the compressor shuts off. The fan then
cycles on for 2 minutes at 10 minute intervals until the
room temperature is above the set temperature, at which
time the compressor turns back on and cooling starts.
NOTE: Fan starts at High Speed and adjusts to a slower
speed as the room temperature dictates. For example if
the room does not get too warm, it will stay at the slowest
speed. If the room temperature rises quickly, such as a
door being opened, it will automatically go to the highest
speed. The fan speeds will re-adjust back to the slowest
speed as the room returns to the original set temperature.
Press the fan button to adjust the fan speed manually.
LIGHT ON
LIGHT ON
LIGHT ON
7
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Sleep Sleep Check
Filter Check
Filter
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Sleep Sleep Check
Filter Check
Filter