Generac 02010-2 - Manual (Page 27)

Generac ® Power Systems, Inc. 25
Figure 2.7 – Typical Noise Abatement 2.2.5 COMPARTMENT FLOOR CUTOUTS
You must provide openings in the generator compart-
ment for the following items (Figure 2.8):
• Engine exhaust and cooling air outlets
• Generator cooling air inlet
• Four holes for passage of generator mounting
bolts. See Section 2.1.4 (Page 23).
Fuel lines and exhaust piping must not pene-
trate into the vehicle living area. !
DANGER
◆
Section 2 – Installation
PRIMEPACT 50 Recreational Vehicle Generator
Figure 2.8 – Compartment Floor Cutout