Gefen Extender DVI 1600HD - Manual (Page 11)

8
1 Reset Button
This button is used to cycle the power off and on. In most cases this will force
the source to re-establish a link with the endpoint device. This will also force the
source to re-read the EDID.
2 Optic B LED Indicator
This LED will indicate the status of the connection between the sender and
receiver’s 2 pair of LC fi ber optic cables labeled Optic B. This LED will be active
when a valid link between the sender and receiver has been established.
3 Status LED Indicator
This LED will indicate the status of the unit and will be active when all devices
are properly connected and indicates that the unit is working within specifi cation.
4 Optic A LED Indicator
This LED will indicate the status of the connection between the sender and
receiver’s 2 pair of LC fi ber optic cables labeled Optic A. This LED will be active
when a valid link between the sender and receiver has been established.
5 Power LED Indicator
This LED will become active once the included 12V DC power supply has been
properly connected between this unit and an available wall power socket.
6 12V DC Power Input
Connect the included 12V DC power supply to this input. The Power LED will
become active when the 12V DC power supply has been properly connected to
the unit and an open wall power socket.
7 Analog Stereo Audio Output
This output will supply analog stereo audio to one pair or RCA audio inputs on
a device. This input will always be active when a 2 channel source, analog or
digital, is selected on the sender.
8 S/PDIF Digital Audio Output
This output will supply digital audio to a S/PDIF (coaxial) audio input device. This
input will always be active when a 2 or multi-channel source, analog or digital, is
selected on the sender.
9 Optic Digital Audio Output
This output will supply digital audio to a TOSLINK (optical) audio input device.
This input will always be active when a 2 or multi-channel source, analog or
digital, is selected on the sender.
10 RS-232 Serial Communications Input
This port is capable of 2-way serial communication between RS-232 devices
connected to the sender and receiver. This port can be connected to a serial
communications device for interaction with a computer via an RS-232 serial
communications cable connected to the sender.
RECEIVER UNIT PANEL DESCRIPTIONS