Grizzly H8253 - Manual (Page 5)

Model H8253 Air Belt Sander -3 -
INTRODUCTION
Motor Speed ........................... 18,000 RPM
Air Consumption ............................ 28 CFM
Air Inlet ......................................
1 ⁄
4
"-18 NPT
Required PSI .............................. 70-90 PSI
Maximum PSI .................................. 90 PSI
Abrasive Belt Size .................. 1" W x 18" L
Sound Level ......................................84 dB
Specifications Foreword
The specifications, details, and
photographs in this manual represent
the Model H8253 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
H8253 Inventory (Figure 1) Qty.
A. Handle ................................................ 1
B. Contact Arm Assembly ...................... 1
C. Hex Wrench (3mm) ............................ 1
D. Air Motor Assembly ............................ 1
E. Sanding Belts 1" x 18" ..................... 11
F. Cap Screw M4-.7 x 14 (Belt Guard) .. 1
G. Belt Guard .......................................... 1
Inventory
Figure 1. Model H8253 Inventory.
A
B
C
D
E F
G