Grizzly G1847 - Manual (Page 5)

-4- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers
Grizzly Industrial, Inc. is proud to offer its Model
G1847, G1852, G1861 and G3811 Pneumatic
Nailers and Staplers. These professional-quality
tools are part of Grizzly’s growing family of fine
woodworking machinery. When used according
to the guidelines set forth in this manual, you can
expect years of trouble-free, enjoyable operation,
and proof of Grizzly’s commitment to customer
satisfaction.
These nailers comprise a large part of our com-
plete line of nail nailers covering most applica-
tions. The G1847 will shoot 18 Ga. staples
between
1 /
2
" and 7 ⁄
8
" long. The G3811 will shoot
18 Ga. staples between 7 ⁄
8
" and 1 3 ⁄
16
" long. The
G1852 will shoot 18 Ga. brad nails between 3 ⁄
8
"
and 1 3 ⁄
16
" long. The G1861 will shoot 18 Ga. brad
nails between 5 ⁄
8
" and 1 9 ⁄
16
". Each will handle up
to 100 fasteners.
We are also pleased to provide this manual with
your pneumatic nailer/stapler. It was written to
guide you through general operating procedures
and safety considerations. It represents our lat-
est effort to produce the best documentation pos-
sible. If you have any criticisms that you feel we
should address in our next printing, please write
to us at the Bellingham, WA address at the end of
this section.
Most important, we stand behind our machines.
We have excellent service departments at your
disposal should the need arise. If you have any
service questions or parts requests, please call or
write to us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone:(570) 546-9663
Fax:(800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
To comment on this manual write to:
Grizzly Industrial, Inc.
C ⁄
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227
To operate this, or any tool, safely and efficiently,
it is essential to become as familiar with its char-
acteristics as possible. Take as much time as
necessary to become acquainted with your pneu-
matic nailer. The time you invest before you begin
to use your tool will be time well spent. Also, read
all of the safety procedures. If you do not under-
stand them,
DO NOT operate your nailer.
SECTION 2: GENERAL INFORMATION
The nailers and staplers described in this
manual are powerful, professional-quality
tools, each designed and built to provide
outstanding results when used cautiously
and with respect. Like any tools of their
type, they can be inherently dangerous.
Careless use could result in serious injury.
Please do not attempt to use these tools
without familiarizing yourself with their
instructions for assembly, adjustment, and
safe operation. Failure to do so could result
in serious personal injury, as well as prop-
erty damage and damage to the tool.
ALWAYS wear ANSI-approved goggles or
safety glasses when operating these or any
other woodworking tool. Wearing hearing
protection is also strongly recommended.
Failure to wear proper safety gear could
result in serious personal injury.