About turbocool – GE 225D1804P001 User Manual

Page 5

Advertising
background image

Consumer

S

uppor

t

Tr

oubleshooting

Tips

Operating

Instructions

Safety

Instructions

Installation

Instructions

5

About TurboCool.

(on some models)

ge.com

How it Works

TurboCool rapidly cools the refrigerator
compartment in order to more quickly
cool foods. Use TurboCool when adding a
large amount of food to the refrigerator
compartment, putting away foods after they
have been sitting out at room temperature or
when putting away warm leftovers. It can
also be used if the refrigerator has been
without power for an extended period.

Once activated, the compressor will turn on
immediately and the fans will cycle on and
off at high speed as needed for eight hours.
The compressor will continue to run until
the refrigerator compartment cools to
approximately 34°F (1°C), then it will cycle
on and off to maintain this setting. After 8
hours, or if TurboCool is pressed again, the
refrigerator compartment will return to the
original setting.

How to Use

Press TurboCool. The refrigerator
temperature display will show

.

After TurboCool is complete, the
refrigerator compartment will return
to the original setting.

NOTES: The refrigerator temperature cannot

be changed during TurboCool.

The freezer temperature is not
affected during TurboCool.

When opening the refrigerator door
during TurboCool, the fans will
continue to run if they have
cycled on.

T

URBO

C

OOL

About Door Alarm

(on some models)

The door alarm will sound if any door is open
for more than 2 minutes. The beeping stops
when you close the door.

(on some models)

D

OOR

A

LARM

(on some models)

(on some models)

(on some models)

About Energy Saver

(on some models)

This product is equipped with an Energy
Saver feature. The refrigerator is shipped with
the Energy Saver feature enabled.

Over time, moisture can form on the front
surface of the refrigerator cabinet and cause
rust. If moisture does appear on the front
surface of the refrigerator cabinet, turn off
the Energy Saver feature by pressing and
releasing the ENERGY SAVER pad on the
control panel.

(on some models)

(on some models)

E

NERGY

S

AVER

Advertising