Grizzly G4003G - Manual (Page 2)

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3 Model G4003G
Main Specifications:
Operation Info
Swing Over Bed......................................................................................................................................... 12 in.
Dist Between Centers.................................................................................................................................36 in.
Swing Over Cross Slide............................................................................................................................... 7 in.
Swing Over Saddle.......................................................................................................................... 11-11/32 in.
Swing Over Gap......................................................................................................................................... 17 in.
Max Tool Bit Size...................................................................................................................................... 5/8 in.
Compound Travel...................................................................................................................................3-1/4 in.
Carriage Travel...........................................................................................................................................24 in.
Cross Slide Travel..................................................................................................................................6-1/4 in.
Headstock Info
Spindle Bore............................................................................................................................................40 mm.
Spindle Size........................................................................................................................................... 3-1/4 in.
Spindle Taper.............................................................................................................................................MT#5
No Of Spindle Speeds.......................................................................................................................................9
Range Of Spindle Speeds..................................................70, 200, 220, 270, 360, 600, 800, 1000, 1400 RPM
Spindle Type.............................................................................................................................. D1-5 Cam Lock
Spindle Bearings................................................................................................. High Precision Tapered Roller
Tailstock Info
Tailstock Travel............................................................................................................................................ 4 in.
Tailstock Taper.......................................................................................................................................... MT#3
Tailstock Barrel Diameter.....................................................................................................................1-9/16 in.
Threading Info
No Of Inch Threads.........................................................................................................................................40
Range Of Inch Threads..................................................................................................................... 4 - 112 TPI
Range Of Longitudinal Feeds................................................................................................. 0.0011 - 0.031 in.
No Of Longitudinal Feeds............................................................................................................................... 40
No Of Cross Feeds......................................................................................................................................... 40
Range Of Cross Feeds.................................................................................................. 0.0004 - 0.0105 in./rev.
No Of Metric Threads......................................................................................................................................29
Range Of Metric Threads................................................................................................................0.2 - 4.5 mm
Dimensions
Bed Width...............................................................................................................................................7-1/4 in.
Leadscrew TPI.................................................................................................................................................. 8
Leadscrew Length...................................................................................................................................... 44 in.
Steady Rest Capacity.........................................................................................................................3/16 - 2 in.
Follow Rest Capacity........................................................................................................................... 1/4 - 1 in.
Faceplate Size............................................................................................................................................10 in.
Leadscrew Diameter............................................................................................................................. 0.870 in.
Feed Rod Diameter............................................................................................................................... 0.780 in.
Floor To Center Height.........................................................................................................................46-1/4 in.
Construction
Base Construction........................................................................................................................................... in.
Headstock Construction....................................................................................................................... Cast Iron
Headstock Gears Construction....................................................................................... Flame Hardened Steel
Bed Construction..................................................................................................Induction Hardened Cast Iron
Body Construction................................................................................................................................ Cast Iron
Stand Construction............................................................................................................................... Cast Iron
Paint.......................................................................................................................................................... Epoxy
Other
Kilowatt Output...........................................................................................................................................1.119