Grizzly G1036 - Manual (Page 5)

-5- G1036 Slow-Speed Grinder
The Model G1036 Slow-Speed Grinder is
shipped from the manufacturer in a carefully
packed carton. If you discover the machine is
damaged after you’ve signed for delivery, please
call Customer Service immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
After all the parts have been removed from the
carton, you should have:
• Slow-Speed Grinder
• Eye Shield
• Eye Shield Bracket
• Phillips
® Head Screws 6-32 x 3 ⁄
8
'' (2)
• Hex Nuts 6-32 (2)
• Tool Rest For 4
1 ⁄
2
'' Grinding Wheel
• Knob
• Hex Nut
5 ⁄
16
''-18
• Tool Rest Assembly For 10'' Wheel
• Hex Bolts
5 ⁄
16
''-18 x 1'' (2)
• Flat Washers 5 ⁄
16
'' (2)
The shipping weight of the Model G1036
Slow-Speed Grinder is about 35 pounds. DO
NOT over-exert yourself while unpacking or
moving the grinder. Use proper lifting tech-
niques or injury could occur.
III. UNPACKING IV. PIECE INVENTORY
NOTE
In the event that any non-proprietary parts
are missing (e.g. a nut or a washer...), we
would be glad to replace them. For the sake
of expediency, replacements can also be
obtained at your local hardware store.