Grizzly H3141 - Manual (Page 5)

H3141 Heavy-Duty Planer -3 -
INTRODUCTION
The specifications, details, and pho-
tographs in this manual represent the
Model H3141 as supplied when the manu-
al was prepared. However, owing to
Grizzly’s policy of continuous improve-
ment, changes may be made at any time
with no obligation on the part of Grizzly. If
you have any comments regarding this
manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C /
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Commentary
We are proud to offer the Grizzly Model
H3141 Heavy-Duty Planer. This model is
part of a growing Grizzly family of fine
tools. When used according to the guide-
lines set forth in this manual, you can
expect years of trouble-free, enjoyable
operation and proof of Grizzly’s commit-
ment to customer satisfaction.
The Model H3141 is perfect for heavy-duty
planing needs. It gives a wide 3
1 ⁄
4
" cut and
can take off 5 ⁄
64
" per pass, as well as a 11 ⁄
16
"
rabbet capability. This planer comes with a
blade wrench, a spare cog belt, an edge
guide and a dust bag.
We are pleased to provide this manual
with the Model H3141. It was written to
encourage safety considerations and
guide you through general operating pro-
cedures and maintenance. This manual
represents our effort to produce the best
documentation possible.
Lack of familiarity with this manual
could cause serious personal injury.
Spend a sufficient amount of time
becoming familiar the contents of
this manual, including all the safety
warnings.