Gateway DC-M40 - Manual (Page 48)

A D V A N C E D
48
SETTING UP THE SHOOTING FUNCTION
ISO
• You can select the camera’s sensitivity to light by selecting the ISO sub menu.
• Raising the ISO sensitivity will mean that the camera needs less light in order to
take an image. However, the higher the ISO value is, the grainier the image
will be.
- AUTO: The camera’s sensitivity is automatically changed by variables such as
lighting value or subject brightness.
- ISO200/ ISO400: In the same lighting condition, the higher the ISO value is,
the less light needed to make an exposure, allowing higher shutter speeds or
smaller apertures.
1. Rotate the mode dial to the SHOT mode.
2. Press the MENU button and press the UP ( ) / DOWN
( ) button to select [ISO].
3. Press the RIGHT ( ) button to select the [ISO] sub
menu.
4. Select the ISO setting by pressing the UP ( ) / DOWN
( ) button. The default is AUTO.
5. After selecting the desired ISO setting, press the OK
button to confirm the setting.
6. Press the MENU button to cancel the menu display.
STILL IMAGE mode