Grizzly T21888 - Manual (Page 6)

model t21888 (mfg. since 2/10) - 4
-
7. avoid entanglements. do not
wear loose clothing, gloves, neck-
ties, rings, bracelets, or other jew-
elry, which may get caught in moving
parts, when operating this tool. Wear
a protective hair covering to contain
long hair.
8. use correct air pressure.
Exceeding the maximum psi rating
of this tool may cause unpredictable
operation or bursting.
9. disconnect air pressure
before servicing, changing acces-
sories, or moving to another loca-
tion. never leave this tool unattended
when connected to air.
10. secure tooling. Always verify
tooling is secure before operation.
11. sharp surfaces. do not place
hands near the tooling surfaces when
in operation.
12. remove adJusting Keys and
Wrenches after use. these
tools become dangerous projectiles if
left on the tool when it is started.
13. avoid flammables. do not use
this tool around any flammables that
may be ignited by sparks.
14. secure WorK. Use clamps or a
vise to hold work when practical. it is
safer than using your hand and frees
both hands to operate tool.
15. maintain tools With care.
Keep tools lubricated and clean for
best and safest performance. Follow
instructions for lubricating and chang-
ing accessories.
16. do not force tool. it will do
the job better and safer at the rate for
which it was designed.
17. checK for damaged parts
before using. Check for bind-
ing and alignment of parts, broken
parts, part mounting, loose bolts, and
any other conditions that may affect
operation. repair or replace dam-
aged parts before operating.
18. use good lighting. Keep work
area well lighted. dark work areas
increase risk of accidental injury.
19. avoid unintentional
operation. Always disconnect air
when not in use, and do not carry tool
with hand on trigger.
20. use the recommended
accessories. Consult owner’s
manual for recommended acces-
sories. Using improper accessories
may increase the risk of injury.
21. never alloW untrained
users to use this tool While
unsupervised.
22. if you are unsure of the
intended operation, stop
using tool. seek formal training
or research books or magazines that
specialize in pneumatic tools.
23. be aWare of hose location.
hoses can easily become a tripping
hazard when laid across the floor in
a disorganized fashion.
24. do not use under the
influence of drugs or
alcohol, or When tired.