Gefen EXT-HDMI1.3-1410-BLK - Manual (Page 5)

2
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 1:10 SPLITTER FOR HDMI 1.3
• By default, display information from the display connected to HDMI output port
1 is sent back to the source. Therefore, the other displays connected to the 1:10
Splitter For HDMI 1.3 must be capable of accepting the timings, resolutions
and audio formats of the display that is connected to HDMI output port 1. It is
recommended that the display with the lowest native resolution be connected
to HDMI output port 1. This is to ensure that a compatible video signal will
be able to be displayed on all connected monitors. There is a generic EDID
programmed into the 1:10 Splitter For HDMI 1.3 that can be used instead. See
page 7 for more details.