GE 15380380 - Manual (Page 4)

4
B
EFORE
Y
OU
B
EGIN
P
ARTS
C
HECKLIST
Make sure your package includes the following items:
M
ODULAR
J
ACK
R
EQUIREMENTS
You need an RJ11 type modular jack, which is the most
common type of phone jack and might look like the one
pictured here. If you don’t have a modular jack, call your
local phone company to find out how to get one installed.
PLAY • STOP
ALL NEW
MIC
ANSWER ON/OFF GREETING
MESSAGES
ERASE
NE XT
V O LU
M E
PR EV IOU S
S E T
M E M O
TAP ELE SS MES SAG ING SYS TEM VOICE TIME
/ DAY /
STAM P
Answerer
Battery
compartment
door
I
NSTALLING THE
B
ATTERY
In the event of a power loss, a 9-volt battery (not included)
enables the answerer to retain messages stored in memory.
To install the battery:
1. Remove the battery compartment door on the bottom of
the unit by loosening the screw with a Phillips screw-
driver. Lift the door.
2. Connect a fresh 9-volt alkaline battery (not included).
The large and small contacts on the battery clip and the
battery will interlock. Once connected, place the battery
inside the battery compartment.
3. Replace the battery compartment door and tighten the
screw.
AC power supply
-
-
+
+
Battery clip
Battery
NOTE : If the battery is low or not installed, the unit
announces “Low Battery” at the end of your
messages.