GTO Wireless Exit Sensors GTO - Manual

ACCESS
SYSTEMS
GTO Wireless Exit Sensor
I N S T A L L A T I O N M A N U A L
Kit Includes:
• Wireless vehicle sensor with direct burial coil assembly and a plug-in electronics/transmitter
module designed for mounting up to 15 feet away from the pavement edge.
• RB709U-NB two channel receiver with instructions.
• Two size AA batteries.
• GTO Wireless Exit Sensor instruction manual for general installation guidance.
Rev. 12/01/08 • Printed in China for GTO, Inc.
Signal Cable
Vehicle Sensor
RB709U-NB
Universal Receiver
Module Cover
Electronics/Transmitter
Module
Programmable
Dip Switches
How it works:
The GTO wireless exit sensor consists of a vehicle sensor, transmitter, and programmable dip switches.
The maximum range between transmitter and receiver is 80-100 ft.
The transmitter module transmits a special GTO transmitter code with additional information to tell the receiver
that this device should be treated as a “free exit” device. The latest GTO gate operators with blue control boards
(GTO “GEN3”) are able to decode this format and recognize the device as a free exit or open only command
without the use of the RB709U-NB receiver. This will simplify installations so only the original receiver will be
required.
The RB709U-NB receiver will be required unless you have the GEN 3 (blue board). The RB-709U-NB has two
channels that can be programmed to operate a remote transmitter or keypad and wireless wand. For instance,
Channel 1 could be wired to the Cycle and COM accessory terminals and could be programmed to operate a
transmitter and keypad. Channel 2 could be wired to the Exit and COM accessory terminals and could be used
to operate the wireless exit sensor. Depending on the frequency of use (vehicle traffic) the two AA batteries will
last about 1 to 3 years.
Thank you for purchasing the GTO Wireless Exit Sensor. Please read the directions carefully and completely before installing.
For more information on GTO's full line of automatic gate openers and access controls visit our website at www.gtoaccess.com
GTO WIRELESS EXIT WAND
TRANSMITTER
CODE TRANSMIT ACTIVE MIN MAX SENSITIVITY
GTO WIRELESS EXIT WAND
TRANSMITTER
CODE
TRANSMIT
ACTIVE
MIN MAX
SENSITIVITY