Garmin SL40 - Manual (Page 10)

Introduction
4 Apollo SL40 Installation Manual
O
THER
R
EQUIRED
M
ATERIALS
The SL40 is intended for use with standard aviation accessories. The following items are
required for the installation:
x comm antenna with cables
x a microphone
x a speaker or headphone
These items may be installed dedicated to the SL40 comm or by connections to an audio
panel.
S
PECIAL
T
OOLS
R
EQUIRED
Crimp Tool
A crimp tool meeting MIL specification M22520/1-01 and a positioner/locater are required to
ensure consistent, reliable crimp contact connections for the rear d-sub connectors. These tools
are available from:
For pin p/n 245-0022
Astro Tool Corp. Phone (503) 642-9853
21615 SW TV Highway Fax (503) 591-7766
Beaverton, OR 97006
Crimp tool: Astro Tool part #615708
Positioner: Astro Tool part #616356
For pin p/n 245-0027
ITT Cannon Phone (714) 261-5300
1851 E. Deere Ave. Fax (714) 575-8324
Santa Ana, CA 92705-6500
Insertion
tool: ITT part # 274-7006-000 (Desc. CIET-20HD)
Regular duty Crimp tool: ITT part #995-0001-585 (Desc. M22520/1-01)
Regular duty Locator tool: ITT part #995-0001-244 (Desc. TH25)
Heavy duty Crimp tool: ITT part #995-0001-584 (Desc. M22520/2-01)
Heavy duty Locator tool: ITT part #995-0001-604 (Desc. M22520/2-08)
L
ICENSE
R
EQUIREMENTS
An aircraft radio station license is required for operation of the transmitter once installed in
the aircraft. An application must be submitted on FCC Form 404, which may be obtained
from the FCC in Washington, DC, or any of its field offices. Procedures for applications are in
CFR 47, Part 87, Aviation Services, Subpart B, Applications and Licenses.