Grizzly H0600 - Manual (Page 5)

H0600 12V Cordless Trimmer -4 -
INTRODUCTION
Commentary
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
To operate this, or any power tool,
safely and efficiently, it is essential to
become as familiar with its characteris-
tics as possible. The time you invest
before you begin to use your Model
H0600 will be time well spent. DO NOT
operate this tool until you are com-
petely familiar with the contents of this
manual. Make sure you read and
understand all of the safety proce-
dures. If you do not understand some-
thing, DO NOT operate the tool.
We are proud to offer the Grizzly Model
H0600 Cordless Trimmer. The Model
H0600 is part of a growing Grizzly family
of fine power tools. When used according
to the guidelines set forth in this manual,
you can expect years of trouble-free,
enjoyable operation and proof of Grizzly’s
commitment to customer satisfaction.
The Model H0600 offers a 12V motor and
cuts a 3 1 ⁄
2
" wide swath through most light
trimming applications. Switch lock keeps it
running without holding the trigger to avoid
stress and hand fatigue.
We are pleased to provide this manual
with the Model H0600. It was written to
encourage safety considerations and
guide you through general operating pro-
cedures and maintenance. It represents
our effort to produce the best documenta-
tion possible.
The specifications, details, and pho-
tographs in this manual represent the
Model H0600 as supplied when the manu-
al was prepared. However, owing to
Grizzly’s policy of continuous improve-
ment, changes may be made at any time
with no obligation on the part of Grizzly. If
you have any comments regarding this
manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C /
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Operating this equipment has the
potential to propel debris into the air
which can cause eye injury. Always
wear safety glasses or goggles when
operating equipment. Be certain the
safety glasses you wear meet the
appropriate standards of the American
National Standards Institute (ANSI).