Dc operation from ten “d” batteries, Installing batteries, Battery operation – GE 05GP005 User Manual

Page 15: 13 powering your spacemaker

Advertising
background image

13

Powering Your Spacemaker™

Installing Batteries

You can operate your Spacemaker™ from DC power by installing
ten “D” batteries into the battery compartment.

1.

Remove the cover of the battery compartment located on the
back of the TV by pressing down on the two tabs marked
OPEN.

2.

Insert ten “D” batteries into the battery compartment as indi-
cated by the drawings in the battery compartment. Be sure to
insert a battery in the single battery compartment.

Note: Alkaline batteries are recommended and will provide
more hours of operation. They will also reduce the possibility
of leakage.

3.

Replace the battery cover by inserting the bottom tabs into
their slots and snapping the cover into place.

Battery Operation

• Make sure the detachable AC power cord is removed from the

AC POWER jack. The TV will not operate on battery power if
the cord is attached.

• Replace the batteries if TV picture shrinks or becomes unstable.

Note: Remove the batteries from the unit if they are not going to
be used for a long time because leakage could occur and corrode
the unit.

+

+

+

Single
Battery
Compartment

Positive
(+) Terminals

Battery Compartment

Back of TV

Negative
(–) Terminals

OPEN

OPEN

Press Here

Back of TV

DC Operation from Ten “D” Batteries

Advertising