Grizzly Flex Shaft G9928 - Manual (Page 5)

G9928 Flex Shaft Grinder -3 -
INTRODUCTION
Commentary Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
G9928 Flex Shaft Grinder. This model is
part of a growing Grizzly family of fine
power tools. When used according to the
guidelines set forth in this manual, you can
expect years of trouble-free, enjoyable
operation and proof of Grizzly’s commit-
ment to customer satisfaction.
The Model G9928 features a 42" long flex
shaft to maneuver around your workpiece,
a foot pedal to control the speed from 0 to
15,000 R.P.M., a motor hanger, and a
5 ⁄
32
"
keyed chuck handpiece. To use chisels,
please order H0757 4-Pc. Carving Chisels
from the current catalog.
We are pleased to provide this manual
with the Model G9928. It was written to
encourage safety considerations and
guide you through general operating pro-
cedures and maintenance. This manual
represents our effort to produce the best
documentation possible.
The specifications, details, and photo-
graphs in this manual represent the Model
G9928 as supplied when the manual was
prepared. However, owing to Grizzly’s
policy of continuous improvement, chang-
es may be made at any time with no obli-
gation on the part of Grizzly. If you have
any comments regarding this manual,
please write to us at the address below:
Grizzly Industrial, Inc.
C /
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Read the manual before assembly
and operation. Become familiar with
this tool, its safety instructions, and
its operation before beginning any
work. Serious personal injury may
result if safety or operational infor-
mation is not understood or fol-