Grizzly Low Profile Cement T10095 - Manual (Page 15)

t10095 Cement Mixer -13-
Follow the tips below when using the cement
mixer:
• Before using your cement mixer, coat the
inside of the mixing drum with a light layer of
vegetable oil. refer to
Lubrication on Page
14 for more details.
• Spray the inside surface of the cement mixer
with a small amount of water before adding
cement (in addition to the lubrication steps
above). this will make it easier to clean after
operation. Avoid spraying water on the switch
or motor!
• the mixer works more effectively and quickly
when batches are half the maximum recom-
mended mixture load, or if mixture materials
are added slowly (while mixing), rather than
all at one time.
• the maximum recommended mixture load is
2.5 cubic feet. this equates to:
— Four and a half 60 lb. bags
— three 90 lb. bags
Operation Tips
SECTION 4: OPERaTIONS
using this machine without proper protective
gear could result in eye or lung injuries.
always wear safety glasses and a respirator
when operating this machine.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
and long hair away from
moving machinery.
Operation Safety
NOTICE
If you have never used this type of machine
or equipment before, WE STRONgLy
RECOMMEND that you read books, trade
magazines, or get formal training before
beginning any projects. Regardless of the
content in this section, grizzly Industrial
will not be held liable for accidents caused
by lack of training.
Children can hurt themselves if playing on
this mixer. If this machine is not stored in
a locked facility, always disconnect power
when leaving it unattended.
Do not put hands, shovels, or other tools
into the mixing drum while it is turning, or
injury or equipment damage may occur.