Grace Digital TUNER GDI-IRDT200 - Manual (Page 21)

21
1. Turn the Dial to choose <Live> or <On Demand>, then press the ‘Select’ button. IF you
choose <Live> then the tuner plays the current output from this station as normal.
If you choose <On Demand> more screens are displayed and you can choose what you want
to listen.
What is displayed will depend on the station you have chosen - the following steps are only a
guide.
2. When you choose <On Demand>, the display shows the names of the programs. Turn the
Dial to choose the program you want, then press the ‘Select’ button.
3. When you have chosen the program you want to listen to, either it will just start playing, or
the display may show a list of days for you to choose from - use the Dial to set the day the
program was broadcast, then press the ‘Select’ button.
4. After you have chosen the day, you may be able to choose the Start Time. Set the Start
Time using the Dial and press the ‘Select’ button.
5. Program which enable you to choose the time also enable you to fast-forward and rewind
to the part you want to into to while the tuner is playing. The elapsed time is displayed. Using
the Skip forward (P3) or Skip backward (P1). Skip forward or backward in 30 second intervals.
Setting the clock
1. Press the ‘Select’ button. (Note: if you make a mistake at any point, press the BACK button
to go back to the previous screen.)
2. Turn the Dial until the display shows <Settings>
Media Player
3. Press the ‘Select’ button.
Alarm Clock
< Settings >
4. Turn the Dial until the display shows <Clock Setup>
Register
< Clock Setup >