Grace Digital TUNER GDI-IRDT200 - Manual (Page 16)

16
IF Auto is selected, your Tuner will detect automatically for either wired connection or
wireless connection.
IF Wired Only is selected, your Tuner will only connect through a Wired connection.
IF Wireless Only is selected, your Tuner will only connect through Wireless Wi-Fi connection.
Configuring the radio to only use a Wired Ethernet connection
Selecting ‘Wired Only’ will cause the radio to reboot and then only use its Ethernet
connection to communicate with the network. The radio will also disable its wireless
network capabilities.
Configuring the radio to only use a Wireless Wi-Fi connection
Selecting the ‘Wireless Only ‘ option from the ‘ Wired/Wireless’ menu will cause the radio
to reboot and then only use its Wi-Fi connection to communicate with the network. The
radio will also disable its Ethernet connection.
Configuring the radio to use either an Ethernet or a wireless connection Selecting the
‘Auto’ option from the ‘Wired/Wireless’ menu will cause the radio to reboot and then
attempt to establish and then attempt to establish an Ethernet connection, if available, to
communicate with the network. Otherwise, the tuner will attempt to establish a Wi-Fi
connection to the network. Once the radio has established a certain type of connection
to the selected network, the connection mode will continue while the radio is on.
Other options under ‘Settings’ include
Refer the next sections Listening to Your Internet Radio Tuner, and Settings Menu for further
details regarding other optional menu items available under the ‘Settings’ menu including
<Network Config.>, <Upgrade Firmware >, <Language>, <FactoryReset>, <Register>,
<Backlight>, <UPNP>, <WiFi Strength> and others...