Grizzly G9922 - Manual (Page 19)

g9922 (mfg. since 12/01)
-19-
10. place the sanding drum into the spindle
and thread it by turning it counterclockwise
(figure 16).
11. to easily access the spindle nut, move the
dust cover out of the way by removing the
two hex bolts that secure it to the machine
base (figure 17).
figure 16. inserting sanding drum.
12. secure the sanding drum into the spindle by
holding the spindle stationary with a 17mm
wrench while tightening the drum with a
19mm wrench, as shown in figure 18.
figure 18. securing sanding drum.
figure 17. removing dust cover.
Hex Bolt