Grizzly G4015Z User Manual
Page 37
Advertising
![background image](/manuals/107117/37/background.png)
G4015 Lathe/Mill
-35-
Figure 42.
Cut-away shows Gear C and D in mesh.
Figure 43.
Gears aligned and in mesh.
Figure 41.
Flats on bushing align with slot.
gear support arm and loosely fasten the
assembly to the tee-nut using the cap screw.
Figure 41
shows the proper sequence. Slide
the combination gear along the slot in the
support arm until gear C meshes with gear
D, as in
Figure 42
, and tighten the cap
screw.
8.
Rotate the support arm until gears B and A
are in mesh. Tighten the cap screw at the
bottom of the gear support arm.
Figure 43
shows the gears properly aligned and in
mesh.
Tee-Nut
Slot
Gear
Support Arm
Bushing
Combination
Gear
Advertising