GE ZSC2201N - Manual (Page 2)

For answers to your Monogram, ® GE Profile ™ or
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center ® service,
800.626.2000.
130310 Specification Created 6/08
Listed by
Underwriters
Laboratories
ZSC2200N/ZSC2201N/ZSC2202N
GE Monogram ® Built-In Advantium ® Oven
36-3/4"
Min.
30"
23-1/2"
Construct Base
Min. 3/8"
Plywood
Supported by
2 x 4 or 2 x 2
Runners all
Four Sides
17-1/2"
530Dia3
25-1/4"
Single Advantium 240V installation
• Maintain 36-3/4" minimum height from the floor
to the cutout in any single or combined installation.
• Allow 2-1/8" case trim overlap on the sides and 7/8"
overlap on the bottom. Allow 3/4" overlap at the top
of the oven.
Installation over a Monogram
Warming Drawer
Additional clearances between the cutouts may be
required. Check to be sure the oven supports above the
warming drawer do not obstruct the required interior
depth and height. See warming drawer installation
instructions for details.
36-3/4" Min.
530Dia13
30"
23-1/2" Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 2 x 2
Runners all
Four Sides
2" Min.
Per Warming
Drawer
Requirement
25-1/4"
17-1/2"
30" 23-1/2"
36-3/4" Min.
45-1/4"
Recommended
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 2 x 2
Runners, all
Four Sides
2" Min.
Per Oven
Requirement
17-1/2"
25-1/4"
Installation over a Monogram Oven
Additional clearances between the cutouts may be
required. See oven installation instructions for details.
30" 23-1/2"
17-1/2"
45-1/4"
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 2 x 2
Runners all
Four Sides
2" Min.
Per Oven
Requirement
2" Min.
Per warming drawer requirement
25-1/4"
Installation over a Monogram Oven and
Warming Drawer
Additional clearances between the cutouts may be
required. See warming drawer and oven installation
instructions for details.
Important: These installation cutouts do not include the accessory drawer.
Dimensions and Installation Information (in inches)