GE 21018 - Manual (Page 24)

24
In the standby mode, press and hold the DO NOT DISTURB button on the
base. The DND backlit indicator will light and
DO NOT DISTURB shows in
handset display.
To cancel, press DO NOT DISTURB again.
H
ANDSET
S
PEAKERPHONE
O
PERATION
NOTE: If you are using the speakerphone, remain close to handset so the
party you are speaking to can hear you.
A
NSWERING A
C
ALL WITH THE
H
ANDSET
1. When the phone rings, press the SPKR button on the handset.
2. When finished, press the SPKR button again to hang up.
M
AKING A
C
ALL WITH THE
H
ANDSET
1. Make sure the phone is OFF (not in talk mode).
2. Dial the desired number,
or
Press the CID/VOL ( ^ or V ) button to select the desired record,
or
Press MEM button and then use CID/VOL ( ^ or V ) button to scroll to
desired memory record.
3. Press SPKR to dial number
4. When finished, press the SPKR button again to hang up.
NOTE: If you are using the handset and want to switch to the speakerphone,
press the SPKR button, press SPKR again to end conversation. If you are using
the speakerphone and want to switch to the handset, press the TALK/END/
CALLBACK button, press TALK/END/CALLBACK again to end conversation.
I
NTERCOM
O
PERATION
The intercom feature allows you to have a conversation with another
registered handset without tying up the telephone line. And since the
telephone line is not in use, you may still receive incoming calls.
M
AKING AN
I
NTERCOM
C
ALL
1. Make sure the phone is OFF (not in talk mode).
2. Press the PAGE/INT button on the handset.