Gefen GTV-MFS - Manual (Page 17)

IR CODE CONFIGURATION
Remote
Remote Channel 1:
Default
1 2
Remote Channel 2:
1 2
Remote Channel 3:
1 2
Remote Channel 4:
1 2
How to Resolve IR Code Conflicts
In the event that IR commands from other remote controls conflict with the
supplied RMT-SR-IR remote control, changing the remote channel will alleviate
this issue. The RMT-SR-IR remote control has DIP SWITCHES for configuring
the remote channel. The Multi Format Switcher must match the remote channel
set in the RMT-SR-IR remote control. Please see page 10 for instruction on how
to configure the channel on the Multi Format Switcher. By default, both the Multi
Format Switcher and the RMT-SR-IR remote control are set to Channel 1.
13