GE 26993 - Manual (Page 8)

8
6. Remove the mounting bracket. Rotate it
so that the bottom of the phone is flat.
Reattach the wall mount bracket by
inserting the tabs into the slots on the
top of the unit first, and then snapping
the bottom tabs into place.
7. Plug the short telephone line cord into
the jack marked TEL LINE on the back of
the unit and plug the other end into a
modular wall jack.
8. Slip the mounting holes over the wall
plate posts and slide the unit down
firmly into place. (Wall plate not
included.)
9. Remove the handset hook; turn it
upside down, and put it back in the slot.
You need to do this so the handset
doesn’t fall out of the base.
10. Raise the base antenna.
9
7
6
8
10