GE 164D2966P126 - Manual (Page 6)

FEATURES OF YOUR OVEN CONTROL
UPPER OVEN LOWER OVEN
1. BAKE. Press this pad select baking
with convection.
2. BAKE. Press this pad to select the bake function.
3. Press this pad to cancel all oven
operations except Clock and Timer.
4. DISPLAY. Shows the operations you have
selected, the time of day and the cooking or
cleaning status.
5. INCREASE. Short taps to this pad increase the
time or temperature by amounts. Press and
hold the pad to increase the time or temperature by
larger amounts.
6. BROIL. Press this pad to select the broil function.
7. OVEN LIGHTS. Press this pad to turn the
oven lights on or off.
8. AUTO SELF CLEAN. Press this pad to select the
self-cleaning function. See the Operating the Self-
Cleaning Oven section.
9. DECREASE. Short taps to this pad decrease the
time or temperature by small amounts. Press and
hold the pad to decrease the time or temperature by
larger amounts,
6
10. STOP TIME. Use this pad along
OVEN
LIGHTS
the
COOK TIME or AUTO - SELF CLEAN pad to set
the oven to start and stop automatically at a time
you select.
11. COOK TIME. Use this pad for Timed Bake,
Timed Convection Bake and Timed Convection
Roast operations.
—
12. CLOCK. To set the clock, first press the CLOCK
pad. Then press the INCREASE or DECREASE
pad to set the time of day. Press the CLOCK pad
to start.
13. TIMER ON/OFF. Press this pad to select the
timer function. The timer does not control oven
operations. The timer can time up 9 hours and
55 minutes.
To set the timer, first press the TIMER ON/OFF
pad. Then press the INCREASE or DECREASE
pad to change the time.
To cancel the timer, press and hold the TIMER
ON/OFF pad until the word “TIMER” disappears
from the display.
14. PROBE UPPER OVEN. Press this pad when
using the probe to cook food (upper oven only).
15. ROAST. Press this pad to select roasting
with convection.
If “F-and a number” flash in the display and
the oven control signals, this indicates function
error code. Press the
pad. Allow
oven to cool for one hour. Put the oven back into
operation. If function error code repeats,
disconnect power to the oven and call for service.