Registration, Battery safety precautions, Service – GE 00019716 User Manual

Page 2: Parts checklist, Installing the handset battery, Extra charging cradle

Advertising
background image

Registration

YOU MUST REGISTER THE HANDSET TO THE MAIN BASE

BEFORE USE!

After the optional handset has charged for 16 hours on

the extra charger, place it on the main base station for 20

seconds, it will then automatically register.

NOTE: PLEASE REGISTER shows on the display

if the handset has not been registered. Once a

handset has completed registration successfully,

READY will show on the handset’s display.

NOTE: In case of a power failure, the handsets

may display UNAVAILABLE when the TALK/CALL

BACK button is pressed. You must then place all

handsets on the main base cradle for 20 seconds

to re-register.

Battery Safety Precautions

• Do not burn, disassemble, mutilate, or puncture. Like other

batteries of this type, toxic materials could be released which

can cause injury.

• To reduce the risk of fire or personal injury, use only the

Nickel-Cadmium (Ni-Cd) or Nickel-Metal Hydride

(Ni-MH) battery listed in the User’s Guide.

• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.

Service

If trouble is experienced with this equipment, for repair or

warranty information, please contact customer service at

1-800-448-0329. If the equipment is causing harm to the

telephone network, the telephone company may request that

you disconnect the equipment until the problem is resolved.
This product may be serviced only by the manufacturer or

its authorized service agents. Changes or modifications not

expressly approved by Thomson Inc. could void the user’s

authority to operate this product. For instructions on how to

obtain service, refer to the warranty included in this guide or call

customer service at

1-800-448-0329.

Or refer inquiries to:

Thomson Inc.

Manager, Consumer Relations

P O Box 1976

Indianapolis, IN 46206

Attach your sales receipt to the booklet for future reference

or jot down the date this product was purchased or received

as a gift. This information will be valuable if service should be

required during the warranty period.
Purchase date _________________________________________
Name of store _________________________________________

NOTE: The RBRC seal on the battery used in your Thomson Inc. product
indicates that we are participating in a program to collect and recycle the
rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org
or call 1-800-8-BATTERY or contact a local recycling center.

If you have purchased an extra handset that is

not of the same type as your original handset

you may still use the original User’s Guide to help

explain the new handsets basic functions and

options.
NOTE: The 25902 accessory handset is equipped

with only basic features and does not have any

handset remote answering features even when it

is registered to Model 25952 or 25982.

Parts Checklist

Make sure your package includes the items shown here.

Installing the Handset Battery

NOTE: You must connect the handset battery

before use.

CAUTION: To reduce the risk of fire or personal

injury, use only the Thomson Inc. approved

Nickel-Cadmium (Ni-Cd) battery model 5-2729

or Nickel-Metal Hydride (Ni-MH) model 5-2522,

which is compatible with this unit.

1. Locate battery and battery door which are packaged together

inside a plastic bag and are separate from the handset.

2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the

compartment.

NOTE: To ensure proper battery installation, the

connector is keyed and can be inserted only one

way.

4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it

snaps into place.

6. Place the handset in the base to charge.

Extra Charging Cradle

1. Plug the AC power adaptor of the extra charging cradle into the

electrical outlet.

NOTE: This power adaptor is intended to be

correctly orientated in a vertical or floor mount

position.

2. Place the handset in the extra charging cradle. The charge

indicator turns on, verifying the battery is charging.

3. Allow the phone to

charge for 16 hours prior to first use.

Handset

Belt

clip

Handset

battery pack

Battery

compartment

cover

Charge

Cradle

Advertising
This manual is related to the following products: