E. night riding – Giant Revive User Manual

Page 17

Advertising
background image

E. Night Riding

Riding a bicycle at night is many times more dangerous than riding during the day. A bicyclist is very difficult for motorists and pedestrians to

see. Therefore, children should never ride at dawn, at dusk or at night. Adults should not ride at dawn, at dusk or at night unless it is absolutely

necessary.

WARNING:

Reflectors are not a substitute for required lights. Riding at dawn, at dusk, at night or at other times of poor visibility

without an adequate bicycle lighting system and without reflectors is dangerous and may result in serious injury or death.

Bicycle reflectors are designed to pick up and reflect street lights and car lights in a way that may help you to be seen and recognized as a

moving bicyclist.

CAUTION:

Check reflectors and their mounting brackets regularly to make sure that they are clean, straight, unbroken and securely

mounted. Have your dealer replace damaged reflectors and straighten or tighten any that are bent or loose.

The mounting brackets of front and rear reflectors are often designed as brake straddle cable safety catches which prevent the straddle cable

from catching on the tire tread if the cable jumps out of its yoke or breaks.

WARNING:

Do not remove the front or rear reflectors or reflector brackets from your bicycle. They are an integral part of the bicycle

safety system.

Removing the reflectors may reduce your visibility to others using the roadway. Being struck by other vehicles may result in serious injury or

death.

The reflector brackets may protect you from the brake straddle cable catching on the tire in the event of brake cable failure. If a brake straddle

cable catches on the tire, it can cause the wheel to stop suddenly, causing you to loose control and fall.

If you must ride under conditions of poor visibility, check and be sure you comply with all local laws about night riding, and take the following

strongly recommended additional precautions:

· Make sure that your bicycle is equipped with correctly positioned and securely mounted reflectors.

· Purchase and install battery or generator powered head and tail lights which meet all regulatory requirements and provide adequate visibility.

·

Wear light colored, reflective clothing and accessories, such as a reflective vest, reflective arm and leg bands, reflective stripes on your

helmet, flashing lights ... any reflective device or light source that moves will help you get the attention of approaching motorists, pedestrians

and other traffic.

16

Advertising