Grizzly G1022PRO - Manual (Page 8)

-6- G1022 Series Contractor Saws
Push Paddles
Push paddles provide added leverage and sup-
port when ripping or crosscutting wide work-
pieces as shown in
Figure 3 . We offer a number
of push paddles in the Grizzly catalog.
Featherboards
Easily made from scrap stock, featherboards
provide an added degree of protection against
kickback as shown in
Figure 4 . To make a
featherboard, cut a 30-40° angle at one end of
the board and make a number of end cuts at
approximately
1 ⁄
4
" apart and 2" to 3" deep. We
also offer a number of featherboards in the
Grizzly catalog.
Figure 2. Zero Clearance Table Inserts.
Figure 3. Push Paddles.
Figure 4. Featherboards.
Push Paddles
Featherboards