Geemarc CLA9 - Manual (Page 8)

8
Installation
Setting Up
Open the battery compartment. Insert the supplied rechargeable
battery (2.4V ) into the battery compartment located on the rear of the
CLA9/CLA9T Conversation Piece.
You also have the option to insert 2 single batteries ( 1.5V AAA non
rechargeable ) instead of the one supplied .
Plug the battery charger in to the main supply and plug the other end
of the lead into the charging port on the left hand side of the CLA9/
CLA9T Conversation Piece. Switch the main supply on.
If the 'On' LED turns red when in use, the CLA9/CLA9T needs
recharging, or replace with new batteries if standard AAA are installed.
During charging, the LED turns on green. When fully charged , the
LED will be off.
Earpiece
Insert the earpiece lead into the earpiece port found on the base of
the Conversation Piece.