Goodmans IPHONE MICRO1468I - Manual (Page 12)

Using the CD
12
04
Random MP3 playback
DON’T FORGET! You need to use the remote
control to use this function.
In play mode press the RANDOM button
on the remote control once, "RANDOM"
will show in the display, and the tracks will
be played in a random order.
To cancel random play, press the STOP
button or press the RANDOM button until
the random indicator disappears
ID3 Tag function for MP3 CD’s
To view ID3 Tag information on an MP3
disc, press the MENU/INFO button during
playback.
Press the MENU/INFO button again to
disable this function and return to normal
track information display.
Programmed CD playback
DON’T FORGET! The CD disc must be
in stop mode.
Press the C-ADJ/ MEMORY or MEMORY
button. The following information will show
in the display:
Press the SKIP / TUNE buttons to select
the track to be stored in location “01” (i.e.
track 03).
1
2
1
2
1
2
Press the C-ADJ/ MEMORY or MEMORY
button. The first track selection is now
stored in program memory.
Select the next track to be programmed
using the SKIP / TUNE buttons (i.e. track
05).
Press the C-ADJ/ MEMORY or MEMORY
button to store this track.
Continue entering tracks in this way until
all the desired tracks are stored (up to a
limit of 20).
DON’T FORGET! If the PLAY/PAUSE button
is pressed before the C-ADJ/ MEMORY
button is pressed, that track will not be
programmed, and the disc will start playing
from the first programmed track. Any track can
be programmed to play more than once.
Listening to programmed tracks
Press the PLAY/PAUSE button.
Disc play will start at the beginning of the
first programmed track.
To Clear the Program Memory
If the disc is playing, press the STOP button
twice, or Select IPOD, AUX or TUNER to clear
the program.
3
4
5
6
1
2
MICRO1468I.book Page 12
When the C-ADJ/ MEMORYor MEMORY
button is pressed to store the 20th track,
the display will show “FUL”.