Gefen EXT-HDMI1.3-242 - Manual (Page 10)

7
IR REMOTE DESCRIPTION
1 LED Button Press Indicator
This LED will be activated momentarily each time a button is pressed.
2 Display and Source Selection Buttons
These buttons are used to select which source is routed to the displays.
Example:
Route the source connected to Input 2 to the displays connected to Output 1 and
Output 2.
1. Press button 2 on the IR remote control unit.
The source connected to Input 2 will be routed to the displays connected to Output 1
and Output 2.
1
2
RMT-2IR Remote Control Unit