Operating the 2x1 dvikvm dl switch – Gefen DL User Manual
Page 14
Advertising
10
OPERATING THE 2X1 DVIKVM DL SWITCH
Switching using the RMT2 (not included)
1.
Connect the RMT2 Remote (Gefen part no. EXT-RMT-2) to the Remote jack
on the 2X1 DVIKVM DL Switch, using a 3.5mm mini-stereo cable.
2.
Press the button on the front of the RMT2 Remote to switch between
DVI In 1 and DVI In 2.
Press button to toggle
p
between input 1 and 2
Advertising