How to use – George Foreman GGR201RCDSQ User Manual

Page 3

Advertising
background image

4

3

Product may vary slightly from what is illustrated.

† 1. Lid handle (Part # 22869)
† 2. Lid (Part # 22865)
† 3. Temperature control probe (Part # 22866)
† 4. Grill base (Part # 22867)
† 5. Grill plate (Part # 22873GP)
† 6. Drip tray (Part # 22868)
† 7. Upper pedestal tube (Part # 22872)
† 8. Lower pedestal tube (Part # 22871)
† 9. Pedestal stand (Part # 22863)
Note: † indicates consumer replaceable/removable parts

how to Use:

This product is for household use only.
ASSEMBLY INSTRUCTIONS
1. Unpack your George Foreman® grill and check that all parts are present

(see A).

2. Before first use wash the grill plate, drip tray and lid in warm, soapy water.

Wipe with a damp cloth and dry thoroughly.

Important: Do not immerse temperature control probe in water or any other

liquid. To clean, wipe with a damp cloth and dry thoroughly.
3. Place the pedestal stand on a flat, level surface.
4. Insert slotted end of lower pedestal tube into hole in center of pedestal stand;

push down firmly.

5. Insert tapered end of upper pedestal tube into top of lower pedestal tube and

screw tubes together.

6. Place grill base on top of pedestal tube assembly through hole in center of grill

base. Rotate slightly so tabs on pedestal tube assembly align with slots in grill

base; always make sure grill base is level.

7. Lift locking latch up so it engages with locking ring

on bottom of grill base and firmly lock into place (B).

8. Slide drip tray into position on grill base using guide

rails.

9. Attach lid handle to lid from the inside.
10. Place lid over grill. Your grill is now ready for use!

GRILLING OUTDOORS
1. Turn temperature control probe to OFF position and attach securely into probe

receptacle.

2. Plug into a standard electrical outlet.
3. Align desired temperature setting with indicator light. Place lid securely on

grill.

4. Allow to preheat to desired temperature – approximately 10 minutes. See

SUGGESTED GRILLING CHARTS for more details.

5. Carefully lift lid and place food onto grill; for most food, you will want to cover

it, so place the lid over the grill.

6. Adjust temperature as needed. Indicator light on temperature control probe

will cycle on and off as thermostat maintains proper temperature; this is

normal operation.

B

A

Advertising