GE Spacemaker WSM2420 - Manual (Page 19)

19 19
Car
e and Cleaning
Dryer
If your dryer is exhausted to the outside, inspect and
clean the dryer exhaust ducting at least once a year.
A clothes dryer produces combustible lint. When the
dryer is not exhausted to the outside, this lint is more
apt to accumulate in and near the dryer, which could
create a fire hazard.
How to reduce the possibility of a fire hazard, if
your dryer (gas dryers must be exhausted outside)
is not exhausted to the outside:
• Clean the lint filter before every load. See Operating
Your Dryer section.
Lint can gather inside the dryer and create a Fire
Hazard. This lint should be removed at least every
2 or 3 years, or more often, depending on dryer
usage.
WARNING
— Electrical Shock and
Personal Injury Hazard
• Unplug the power supply cord or turn off the
electrical power.
• Do not put hands inside the cabinet.
• Make sure the dryer is cool.
• More than one person is required to lift, tilt
or move the washer/dryer because of its weight
and size.
Failure to do so could result in electrical shock,
injury or damage.
Cleaning should be done only by a qualified
person.
1. Unplug unit from electrical supply or turn off
electrical power.
2. Remove back panel from dryer. (See Installation
Instructions.)
3. Avoid touching wires and thermostats.
4. Remove lint from boxed-in area with a soft brush
or vacuum cleaner.
5. Replace back panel, reconnect and level the
appliance.