Grizzly G0476 - Manual (Page 8)

-6-
G0472/G0473/G0476 Sandblasters
Additional Safety Instructions for
Sandblasters
8. MAINTAINING MACHINE. Check cabinet
for any leaks, and reseal immediately.
9. SAFE SAND BLASTING. Do not use sys-
tem over the rated PSI.
10. CORRECT LIGHTING. Do not use a light
that uses over 60 watts.
11. LOADING & UNLOADING. Disconnect the
air supply before loading or unloading the
workpiece from the sandblaster cabinet.
12. SAFE MAINTENANCE. Disconnect air
supply and electrical before doing mainte-
nance.
13. SAFE SANDBLASTING. Always secure
the door(s) before beginning sandblasting
operations.
1. CORRECT ABRASIVES. Never use wet
abrasives in this sandblaster, it is designed
for dry abrasives only.
2. PROTECTING LUNGS. Make sure that
you always use a respirator when using or
cleaning the sandblaster.
3. LEAVING THE AREA. Always disconnect
air supply when leaving the sandblaster.
4. PROTECTING EYES. Make sure that you
always use safety glasses when using or
cleaning the sandblaster.
5. PROTECTING ENVIRONMENT. Always
close and latch shut the sandblaster doors
when not in use.
6. WORK AREA SAFETY. Clean dust collec-
tor and filters often, and repair any suction
hose leaks immediately.
7. MAINTAINING COMPONENTS. Replace
nozzles, hoses, lenses, and gloves when
they become worn.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.