GE 840136200 - Manual (Page 4)

4
1. Unplug iron. Turn Adjustable Steam
to the Dry Iron position. Set iron
upright on heel rest. Using a cup,
slowly pour 8 ounces (250 ml) of tap
water into the water tank opening (or
until MAX fill line is reached).
2. Plug in iron.
3. Press Temperature Selector. With
iron in an upright position, set Fabric
Setting Indicator to desired setting in
steam range. Allow the iron to heat
until the indicator box around the
selected fabric stops blinking. Do not
preheat the iron with the soleplate
facing down.
To Steam Iron
4. Set Adjustable Steam to desired steam
output. See the “Fabric Setting Chart.”
5. To turn iron off, turn Adjustable
Steam to Dry Iron . Press
Temperature Selector. Set Fabric
Setting Indicator to OFF/0 and
unplug iron. The iron may be turned
off by pressing the Temperature
Selector button for 3 seconds.
6. Empty water from the iron following
directions in “Caring for Your Iron
and Soleplate.”
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
To Dry Iron
4. To turn iron off, set Fabric Setting
Indicator to OFF/0 and unplug iron.
The iron may be turned off by press-
ing the Temperature Selector button
for 3 seconds.
1. Plug in iron.
2. Turn Adjustable Steam to the Dry
Iron position.
3. Set Fabric Setting Indicator to
desired temperature. Allow the iron
to heat until the indicator box
around the selected fabric stops
blinking.
Using Your Iron
Features
(on selected models)
Blast of Steam and Spray Buttons
Push Blast Button for an extra blast
of steam. Push
Spray Button to
release a fine
spray of water for
difficult wrinkles
in cotton or linen.
Quick Off
Press and hold the Temperature Selector
for 3 seconds to
turn the iron off
quickly.
Spray Blast
Temperature
Selector
840136200 Ev02 6/29/05 9:55 AM Page 4